Tetra - Recessed
Recessed

Tetra - Surface
Surface

 

General

Series: Tetra


Brand: Platek
Platek products

Division: Exterior
Exterior products

Mounting Type: Recessed, Surface

Mounting Location: In-Ground, Wall


 

Physical

Shape: Rectangle

Length (mm): 36, 358, 450

Length (in): 1 716, 14 18, 17 1116

Width (mm): 36, 65, 130

Width (in): 1 716, 2 916, 5 18

Height (mm): 65, 68, 210

Depth (mm): 136

Height (in): 2 916, 2 1116, 8 14

Depth (in): 5 38

Extension (mm): 135

Extension (in): 5 516


Weight (kg): 2.2, 2.6, 3.2

Weight (lbs): 4.8, 5.73, 7.05

Load Resistance (kg): 500

Load Resistance (lbs): 1102

Installation Requirement: Installation in sleeve set in concrete with a 20-30 cm gravel drain bed

Screws: A4 stainless steel

Diffuser: Clear tempered glass

Gasket: Gore-Tex valve to prevent condensation inside the fitting.


Fixture Material: Extruded Aluminum

 

Electrical

Lamp Type: LED

Input Wattage (W): 6.9, 7.3

Total Output Wattage (W): 6, 6 / 11.5 (RGBW)

Dimming: Non-Dimmable

Control Gear: DMX

Driver Included: Yes, Yes (excluding RGBW)



Driver Class: Class 2

Input Voltage (V): 120, 120 - 277

Output Voltage (V): 24

Constant Current (MA): 350, RGBW 500

Upon Request: (Not included - see components [IP65 or higher enclosure to be supplied by others]) Remote: DMX / 0-10Vdc dimming / Phase dimming

 

LED

Number of LEDs: 6, 6 / 8 (RGBW)

Color Temperature (°K): 3000 / 4000, 3000 / 4000 / RGBW

Max. Delivered Lumen (lm): 490 / 520, 515 / 535, 740 / 770

Nominal Lumen (lm): 840 / 870

CRI: >80 CRI

Lamp Life (hrs): 60000

 

Optical


Beam Angle: 2x12 / 2x44 / 12-44

Adjustability: Tilt ±45°

 

Ratings and Certifications

Certified By: Certified for North American Standards

IP rating: IP65, IP67

IK Rating: IK07, IK10

Bug Rating: B0 U3 G0, B1 U1 G0, B1 U3 G0

 

 

Tetra 3 matching products

Tetra by Platek – 17 11/16″ x 2 11/16″ Recessed, Walk Over offers high performance and quality material | Zaneen Exterior E9I462- Tetra Incasso 360 - In-ground - Adjustable - 7.3W (6 LED) - 3000K / 4000K - Optics: 13° / 26° / 40° / ELL
Tetra by Platek – 14 1/8″ x 2 9/16″ Surface, Wallwash offers high performance and quality material | Zaneen Exterior E9W189- Tetra Linear 360 - Wall - Uplight - 7.3W - 6 LED - 3000K / 4000K - Optics: 12° / 40° / Elliptical
Tetra by Platek – 1 7/16″ x 8 1/4″ Surface, Wall Effect offers high performance and quality material | Zaneen Exterior E9W570- Tetra 75 Applique - Surface - Bi-directional - 6.9W LED - 3000K / 4000K - Optics: 12° / 44° / 12°/44°

Series Description

Tetra is a family of post, recessed and surface lighting from rationalist design. Tetra is a slender architectural structure, with a square base and two vertical slats supporting the light source. When illuminated, this ephemeral structure disappears from sight, transforming into two beams of geometrical light which create an interplay of light and shadow on the ground. Tetra is an efficient fixture for lighting open spaces, pedestrian areas and urban zones. The body is made of extruded aluminum alloy, corrosion-resistant. Protection by means of iridite, epoxy powder base coating and polyester painting.

Manufactured in Italy, by Platek.

 

Fixture Finishes

SST - Stainless Steel Inox BLK - Black WHI - White GRY - Gray COR - Corten ANT - Anthracite BRZ - Bronze
Digital Disclaimer: Not all screens are calibrated the same, and therefore, colors will appear differently between screens.

Features